Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Dave wrote:
... for cw, am, and even ssb in amateur sized systems these are generally very good and yeild answers that are more than adequate to answer problems like this. Yep, pretty good for answering the transmitter question. Not so good for answering the question of what happens between a tuner and an antenna. One must remember that with your method, one is dealing with virtual impedances, i.e. voltage to current ratios, which are themselves a result and not the cause of anything. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Rho = (Zload-Zo*)/(Zload+Zo), for complex Zo | Antenna | |||
Derivation of the Reflection Coefficient? | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna |