Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
On Thu, 02 Feb 2012 20:14:41 -0500, Bill Peters wrote:
I put up a 20 meter dipole array a while back and I don't seem to be receiving the greatest signals. The height is fairly low, about 20', and one part of the array is fairly close to an aluminum fence I have surrounding the property. I'd say the southern leg of the array is about 25' away from the fence. So I ask the question: what effect can fences have on antennas and what are some possible solutions? I can rule out moving the antenna because I lack the room to move it any further away from the fence. Thanks, Bill At 20' AGL I'd be using a full wave horizontal loop for receiving. I transmit with a vertical and use a loop plus the vertical (via MFJ-1026) for receive. for receive |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Cushcraft 20 Element DX-Arrays | Swap | |||
Foursquare arrays of 40M verticals | Antenna | |||
The Circle of Zap ! - Lightning - How Close Is Close ? | Shortwave | |||
Mininec antenna computor programs and Gaussian arrays | Antenna | |||
Bricks effect in dipole resonance? Help! | Antenna |