Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "MLNJ" wrote in message ... Looking at portable and easy to deploy method of putting up a 5/8 omni directional antenna for CB/10-11m trans/rec. Is hooking up an antenna wire to a helium balloon on the "top" end and connecting it to coax at the "bottom" a possible option? Obviously there are many environmental limitations with the concept, and it is a strictly single use application. But for camping or emergency back up use, the concept sounds at least plausible. Anyone have any technical reasons why this is not feasible? Better yet, anyone have any experience with anything similar? If you include operation in the rain then the balloon needs to be attached to a low-voltage point on the antenna - certainly not the end of a dipole element because a wet string leading to a wet balloon would likely detune it. Some people I used to know used discones in this application, and the centre of the disc is a relatively low-voltage/low-impedance part of the antenna. The technique was used extensively in planning the UHF transmitter network for television broadcasting in the UK, before computer modelling and simulation was allowed to take over with remarkably little proof of its accuracy! Chris |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Pictures of your antennas in the Antennas in the World directory | Antenna | |||
WTB 80/40 Mor-gain or Antennas West PM Antennas | Antenna | |||
Gap Antennas | Dx | |||
How High Will Helium Baloons Go? | Policy | |||
OT MONSTER - SUICIDE - AMERICA (lift your voices to the heavens) | Shortwave |