Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Take a length of 300 ohm twinlead. Short the far end, End feed one side of
the close end, and leave the other side disconnected. What do I have? I know if I short both ends, I have a wide(er) bandwidth end fed random wire. Is it still an end fed random wire with an electrical length of twice its physical length? Something completely different? If for example, if I have 10 meters of space, and hang it, will I have a 20 meter long random wire, which would sort of be a 40 meter band 1/2 wave end fed antenna? Or would I have an odd 10 meter long end fed antenna (for 20m?) Can it be switched between the two by adding a shorting switch at the close end? Open it would be for 40m, and closed for 20? TIA, Geoff. -- Geoffrey S. Mendelson, N3OWJ/4X1GM/KBUH7245/KBUW5379 It's Spring here in Jerusalem!!! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
twinlead tuning indicators | Antenna | |||
Twinlead antenna | Antenna | |||
300 ohm TV Twinlead | Antenna | |||
twinlead question | Antenna | |||
ANTENNA TWINLEAD FEEDER | Antenna |