LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #5   Report Post  
Old September 25th 13, 10:42 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: May 2011
Posts: 550
Default Tape measure antenna with hairpin match

On 9/25/2013 4:27 AM, John S wrote:
On 9/24/2013 9:04 PM, David Ryeburn wrote:
In article ,
(David Platt) wrote:

When you lengthened the hairpin, you added inductance... probably too
much, so you've not only cancelled out the capacitive reactance from
the DE, but have left some excess inductance shunted across the DE.


Backwards. Too much inductance to resonate with the effective (parallel)
capacitance would have resonated with a somewhat smaller capacitance
than you actually have. (The product of inductance and capacitance has
to be the same, for a given resonant frequency.) So you can think of the
actual capacitance present as consisting of however much would be needed
to resonate with the (too large) inductance, in parallel with more
capacitance which does NOT get cancelled out by the inductance. Result:
the actual hairpin, plus the effective (parallel) capacitance the too
short driven element presents, is capacitive, not inductive (in parallel
with the desired 50 ohms).

This is just the opposite from a series resonant circuit where too much
inductance gives an overall inductive result.

Otherwise, I agree with everything David Platt wrote.

David, VE7EZM and AF7BZ


No, David Platt is correct. You are assuming the effective capacitance
is in parallel. The antenna equivalent circuit is a *series* RC. Put in
too much *shunt* inductance and the combination looks inductive at the
feed point.

John KD5YI


I'm wrong. Please disregard.

Sorry.

John


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thoughts about the tape measure 3 element direction finding Yagi Helmut Wabnig[_2_] Antenna 12 September 10th 11 08:03 PM
Measure Antenna Gain [email protected] Policy 1 March 11th 07 02:14 PM
how to measure antenna impedance ? dansawyeror Antenna 16 December 6th 05 04:57 AM
Tape Measure Yagi Antenna Questions [email protected] Antenna 3 November 11th 05 02:28 PM
Yagi Hairpin Match muskie Antenna 2 March 24th 05 08:52 AM


All times are GMT +1. The time now is 02:53 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017