| Home |
| Search |
| Today's Posts |
|
#1
June 27th 04, 05:51 PM
|
|||
|
|||
Hustler 40 super resonator rod length
Can anyone supply the approximate exposed tip rod lengths on the RM-40-S
resonator as a starting point.. Tnx, Bob AA8X |
|
#2
June 28th 04, 10:35 PM
|
|||
|
|||
|
Bob:
About 36 inches would be a good starting point. Roger K6XQ "BJ" wrote in message ... Can anyone supply the approximate exposed tip rod lengths on the RM-40-S resonator as a starting point.. Tnx, Bob AA8X |
|
#3
June 28th 04, 10:35 PM
|
|||
|
|||
|
Bob:
About 36 inches would be a good starting point. Roger K6XQ "BJ" wrote in message ... Can anyone supply the approximate exposed tip rod lengths on the RM-40-S resonator as a starting point.. Tnx, Bob AA8X |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: Hustler RM-75-S | Antenna | |||
| Optimizing for Loop Length | Antenna | |||
| Element Design with Loading Coils | Antenna | |||
| Question on antenna symantics | Antenna | |||
| Hustler 6BTV Vertical - Tech Problem | Antenna | |||
Linear Mode
