Home |
Search |
Today's Posts |
#22
![]() |
|||
|
|||
![]()
On Mon, 16 Dec 2013 11:21:30 -0800, David Harmon
wrote: On Sun, 15 Dec 2013 23:43:26 -0800 in rec.radio.amateur.antenna, Jeff Liebermann wrote, Marginally related RF drivel: One of my friends is avid DX'er. He has all his media and computer gizmos interconnected via Wi-Fi because Wi-Fi creates less RFI than ethernet. Woah, how can that be? Would using shielded cat6 fix it? I don't know. I don't have much experience with CAT6 STP as most of my installations use CAT5e UTP cable (including for gigabit). It might reduce radiation by shielding, or increase it if there's a ground loop. In any case, the owner was not interested in wiring the house, station, garage, antenna farm, front gate, home theater, etc for ethernet. Wi-Fi did the job well enough and did not product RFI. In retrospect, I probably should have spent more time finding the exact sources of the HF interference. I did not make a systematic check of the house, and did not check everything electrical in the house. I didn't have the time as that would have taken days. Instead, there was a large drop in RFI observed when the ethernet connected devices were unplugged, so we went with that. -- Jeff Liebermann 150 Felker St #D http://www.LearnByDestroying.com Santa Cruz CA 95060 http://802.11junk.com Skype: JeffLiebermann AE6KS 831-336-2558 |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Which is better: 5/8 wave vertical or J pole? | Antenna | |||
New program - 1/2-wave vertical | Antenna | |||
5/8 wave 6m vertical | Antenna | |||
1/4 wave vertical vs. loaded vertical | Antenna | |||
upside down vertical? | Antenna |