Ralph Mowery wrote:
I have not seen a whole lot of equations on SWR but the few I have seen
never mention the source at all.

When someone defined the generated power as the forward power minus the
reflected power, the entire problem was defined out of existence. :-)
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

W5DXP wrote in message ...


I was thinking about how you changed the impedance of your SWR
meter, and I doubt that simply changing the terminating resistors to
ground on both directional couplers is all you have to do.

I believe this because the SWR/power meter needs to be a Zo ohm
Thru, with a microstrip line of a certain dielectric thickness, and
particular width and spacing from the couplers. And you cannot change
these very easily.

Do you have a schematic for us to see?


Slick