On Sun, 17 Aug 2003 07:25:45 -0500, W5DXP
wrote:

Richard Clark wrote:
Thank you. I see that for the 50 Ohm load that the line exhibits a
characteristic of 50 Ohms as described by its concentricity about the
reference.

This is no surprise given the cable is premium short run (length, not
reels) material specified out to 20 GHz (from Boeing's precision
electronics facilities). I have several hundred feet brand new.

Please plot your data on a Smith Chart. Since your data is
obviously nonlinear, I would suggest diagnosing the nonlinearity
problem before concluding anything. For instance, what is the
one tenth scale RF RMS voltage before it is rectified by the
diode?


Hi Cecil,

That is the whole point of Mismatch Uncertainty. What you call
nonlinearity is the NBS documented conclusion of the mismatched
conditions at both ends.

Feel free to investigate and enquire further about your concern over
nonlinearity.

73's
Richard Clark, KB7QHC

Richard Clark wrote:
That is the whole point of Mismatch Uncertainty. What you call
nonlinearity is the NBS documented conclusion of the mismatched
conditions at both ends.

I suspect many of the irregularities would be greatly diminished
if you ran the experiment at 50 watts forward instead of 5.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----