LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old June 27th 14, 06:37 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,898
Default replacing rg 213 with hardline

Ralph Mowery wrote:

"Rob" wrote in message
...
One ham said when he did he could tell the differance. I just don't see
that going from about .4 db or less of loss to .15 db of loss on 80
meters
is going to be noticed.


But what when he was working on 70 centimeters instead of 80 meters?
Then it would be a large difference.


I should have made it clear that this is for 80 meters only, no higher band.
Also he did not say what kind of differance he noticed, just that he did.


If changing from RG213 to hardline made any real difference at 80M, then
the RG213 was bad and needed replacing.

Very few hams have anything in their shack that can detect differnces of
a fraction of a db.

The only advantage to hardline at HF that I can think of is that good
hardline will likely outlive you and hence not require replacing in your
lifetime.


--
Jim Pennino
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New Technology Is Already Replacing Radio bdenley Shortwave 10 May 13th 08 02:45 AM
replacing a bc 200XLT GotBonus? Scanner 1 November 17th 05 04:01 AM
Help Re Replacing my 811A's in my Amertron Amp DLD Homebrew 6 March 18th 05 02:46 AM
Q: Replacing RF inductors? COBRA_STRIKE CB 1 July 21st 04 05:19 AM
Replacing the speaker on R/S DX-398??? Howard N. Lute Shortwave 1 December 1st 03 01:58 AM


All times are GMT +1. The time now is 06:49 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017