Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]() "rickman" wrote in message ... .. Wow, $880 not including the labor. I guess the $210 for the tower is not so big a deal. Actually, I expect 60 foot of ladder would be just as much if not more. I did most of the work myself. The only help was once I had up the first 4 sections, some other hams came over and stayed on the ground pulling up the other sections of tower and antenna to me with a rope and gin pole. Labor was free except for a few soft drinks and snacks.. The actual used tower was not very expensive, it is just the other nonoptional items you have to go with it if done anywhere near right. Most people don't think about that cost. Then there is the rotator and antennas and coax. I think the coax was the most single expense I had as I used 500 of Davis Burryflex to feed 4 antennas. Not the best for the 2 meter and 432 antennas,but good enough to play with. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
75 ft tilt over/ fold over HD tower w/ rotor | Swap | |||
Ferrite Rod AM/MW Antennas : To Tilt ? -or- Not to Tilt ? {What's TheDifference... If Any ?} | Shortwave | |||
WTD Crankup Tilt over tower | Equipment | |||
WTD Crankup Tilt over tower | Equipment | |||
FS: 40 foot crank up tilt-over tower, Antenna and rotor | Swap |