| Home |
| Search |
| Today's Posts |
|
#7
|
|||
|
|||
|
"J.B. Wood" wrote in
: The E and H far-field formulas I previously provided give magnitude and direction of these vectors using spherical coordinates (r, theta, phi) relative to a Cartesian system. If you don't understand coordinate systems and vectors then I can see why you might be confused. I'll admit to that. All I knew was that this loop I saw was a helix, pointed so the axis of the 'cylinder' would point to the stantion wanted, and was laid with an open coil on a frame rather than wound like wire on a pully or other former that would bunch the windings as close as possible. I imagined that if ether form were pointed not-so-accurately at the right spot, the helical form might 'blur' the response, weakening it, allowing it to be more selective of something it WAS accurately pointed at. Other than this, I don't know why it would be built with this extra spacing per turn, because it limits easy portability. I assume there is a good reason, I just don't know it.. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Spacecraft antennae | Homebrew | |||
| Antennae for 136kHz? | Antenna | |||
| Coaxial Collinear... To short or not to short | Antenna | |||
| Antennae base | Homebrew | |||
| Amateur Antennae | Antenna | |||