| Home |
| Search |
| Today's Posts |
|
#3
August 13th 04, 12:03 AM
|
|||
|
|||
Thomas wrote:
I have an ICOM-725 (HF system, 100W output) connected to a MFJ tuner and then about 120 foot feedline run to an antenna I made myself. I can get the SWR on the MFJ tuner to read nearly 1:1, but the transmitter display shows only about a 25% power output. Is the power output knob on the IC-725 fully clockwise? What magnitude of forward power does the tuner indicate? -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Tx Source Impedance & Load Reflections | Antenna | |||
| Derivation of the Reflection Coefficient? | Antenna | |||
| The Cecilian Gambit, a variation on the Galilean Defense revisited | Antenna | |||
Threaded Mode
