LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #15   Report Post  
Old August 12th 04, 09:57 PM
Dave Platt
 
Posts: n/a
Default

If an anteena has a specific range dominated by its power input and a
distance thru air would not a ntenna with more gain allow it to0 travel a
longer distance until the plane came to a distance to allow a relay to drop out.


If you were able to place both the transmitter, and the plane in free
space, and there weren't other signal sources in the area, this
approach might work out.

In practice, though, I think you're going to find multipath and
reflections to be a real problem. Irregularities in the ground, the
presence of buildings and trees, etc. are going to generate enough
reflections to cause some serious, and unpredictable changes in the
signal strength as seen by the receiver in the plane.

De-sensing of the receiver by transmitters on nearby frequencies,
noise pickup, directional variations in the plane receiver's antenna,
etc. are also going to be problems. I think you'll need a fairly
narrow-band receiver, with a well-controlled and fixed gain and a wide
dynamic range, and some form of averaging circuitry to get you past
the multipath / picket-fence problems.

I'm sure that something like this _can_ be done, and can probably be
done well enough to result in meaningful measurements. To do so, I
think you're going to have to invest a good deal of time, energy,
thought, and perhaps money in the design. A poorly-designed approach
would introduce so many sources of possible error that any results you
got from it would not be particularly meaningful or significant.

I was looking for a meaningfull indication of gain that would not be
assaulted gurus negatives with respect to isentropic gain and disbelief of
calculations made.


I'd suggest studying how this sort of measurement is performed in a
professional context - e.g. on antenna ranges located out in the
country well away from strong RF sources, and in shielded RF-anechoic
chambers (for near-field measurements and for higher frequency
measurements, where the chamber is a reasonable number of wavelengths
across).

What better way for the man in the street to understand antenna gain rather
than messing with dbi, dbd e.t.c., which an amateur uses to fulfill his need
for conflict?


Please don't confuse "conflict" with "criticism". The former is
unnecessary (although unfortunately it's rather common). The latter
is utterly necessary in any form of scientific endeavor!

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Antenna tuner Matthew&Wendy Antenna 68 August 10th 04 12:32 PM
Unity Gain? Dan Richardson Antenna 8 June 26th 04 09:15 PM
Ten-tec vee beam Tom Coates Antenna 8 September 21st 03 12:47 AM
Reflection Coefficient Smoke Clears a Bit Dr. Slick Antenna 126 September 10th 03 04:26 PM
Hy Gain TH3 MK3 triband Beam Crazy George Antenna 0 August 26th 03 04:34 AM


All times are GMT +1. The time now is 12:13 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017