Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old August 16th 04, 06:18 PM
Doug
 
Posts: n/a
Default

KC1DI wrote in message ...
Doug Birky wrote:
I'm putting up an offset dipole. I'm attaching a 4:1 balun. I'm running
RG-8 to the balun. The dipole will be attached at 20' and the other end will
be about 40'. My question is can the coax be tie-straped to the short end
of the dipole antenna wire and run back with it toward the houes? This is
basically to keep a big loop from hanging down and also keeping the wife
happy since it would look much cleaner. I didn't know if this would have a
large impact on operation or not.

73
Doug / KC8YEC


Hi Doug,

I'm Running the Windom ( OFCD) it identical to what your saying. but
you'll find that the coax needs to come off the antenna in pretty much a
90 degree angle. ohterwise you will end up with lots of fedline
radiation which will cause problems in the shack.
73 Dave kc1di


Can you give me an indication about how long a lead I need before
running the coax back toward the house and into the radio? I'm going
to run the coax up the house and out to the feedpoint.

Doug
  #2   Report Post  
Old August 16th 04, 10:26 PM
Jack Painter
 
Posts: n/a
Default


"Doug" wrote in message
om...
KC1DI wrote in message

...
Doug Birky wrote:
I'm putting up an offset dipole. I'm attaching a 4:1 balun. I'm

running
RG-8 to the balun. The dipole will be attached at 20' and the other

end will
be about 40'. My question is can the coax be tie-straped to the short

end
of the dipole antenna wire and run back with it toward the houes?

This is
basically to keep a big loop from hanging down and also keeping the

wife
happy since it would look much cleaner. I didn't know if this would

have a
large impact on operation or not.

73
Doug / KC8YEC


Hi Doug,

I'm Running the Windom ( OFCD) it identical to what your saying. but
you'll find that the coax needs to come off the antenna in pretty much a
90 degree angle. ohterwise you will end up with lots of fedline
radiation which will cause problems in the shack.
73 Dave kc1di


Can you give me an indication about how long a lead I need before
running the coax back toward the house and into the radio? I'm going
to run the coax up the house and out to the feedpoint.

Doug


90 degrees under the antenna, not perpendicular at it's elevation. Get as
far away as possible, burying the feedline so your earlier dilemma will not
be worsened ;-)

I know my wife just _loves_ seeing that feedline "drop out of the sky" in
the middle of the lawn. But that's the way the antenna is designed. Suggest
you try that, determine it's efficiency by whatever means you can, then try
running it straight over to the house. I think we all agree it will lose
some output power back onto the feedline, but you could handle the safety
issue there, or try, with some RadioWorks line isolator products.

Jack


  #3   Report Post  
Old August 18th 04, 11:12 AM
KC1DI
 
Posts: n/a
Default


Hi Doug,

I'm Running the Windom ( OFCD) it identical to what your saying. but
you'll find that the coax needs to come off the antenna in pretty much a
90 degree angle. ohterwise you will end up with lots of fedline
radiation which will cause problems in the shack.
73 Dave kc1di



Can you give me an indication about how long a lead I need before
running the coax back toward the house and into the radio? I'm going
to run the coax up the house and out to the feedpoint.

Doug


Hi again Doug,

Was out of town so did not get your question for a few days.

You should run it away from the antenna at 90 degrees for about 1/4 wave
if possible. on 80M that would be about 66 ft. but as far as you can
in any event. some claim choke balun at 22' down the feedline works
well Mine is about 30' then a choke balun then about 75' to the shack
and it seem to work for me.
73 Dave

  #4   Report Post  
Old August 21st 04, 12:03 AM
Doug Birky
 
Posts: n/a
Default

I do have 1 other option. I have some 50' trees that would stretch about
130' apart. The issue is they are about 200' from the shack. Can I run that
much coax?

KC1DI wrote in message
...

Hi Doug,

I'm Running the Windom ( OFCD) it identical to what your saying. but
you'll find that the coax needs to come off the antenna in pretty much a
90 degree angle. ohterwise you will end up with lots of fedline
radiation which will cause problems in the shack.
73 Dave kc1di



Can you give me an indication about how long a lead I need before
running the coax back toward the house and into the radio? I'm going
to run the coax up the house and out to the feedpoint.

Doug


Hi again Doug,

Was out of town so did not get your question for a few days.

You should run it away from the antenna at 90 degrees for about 1/4 wave
if possible. on 80M that would be about 66 ft. but as far as you can
in any event. some claim choke balun at 22' down the feedline works
well Mine is about 30' then a choke balun then about 75' to the shack
and it seem to work for me.
73 Dave



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Non-radiating Feedlines? Richard Fry Antenna 22 June 15th 04 04:29 AM
6m vert dipole Tyas_MT Antenna 6 April 14th 04 01:00 AM
Sources for Inexpensive RG-8?? Brian Kelly Antenna 62 April 11th 04 12:36 AM
Some help with Dipole Height Mike Antenna 1 February 22nd 04 01:39 AM
70 ohm dipole to 50 ohm feed line question Tom Sedlack Antenna 10 October 6th 03 01:24 AM


All times are GMT +1. The time now is 06:56 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017