Menu

chain link fence

Search this Thread

Prev

Previous Post

Next Post

Next

#6

Report Post

Old

August 24th 04, 01:09 AM

Roger Halstead

Posts: n/a

Default

On 23 Aug 2004 19:07:34 GMT, ospam (greg z) wrote:

Hmmm Sounds good , Put up a 1wl loop for 80 meters (274ft+/-)?
up 20 to 40 feet,feed it with ladder line or window line (61ft) into a
balanced tuner and rock and roll. Should be able to cover the entire
US on 40 and 80meters with some rather Brutal lobes on 20m.
You be Jammin!!!

Careful with CL fence. It may work, but older fence may turn out to
be hundreds or thousands of tiny diodes at the points of contact where
the fence is woven..

When we had the repeater here I found a 10" piece of wire laying
against a guy wire created enough noise to drowned out a 50 watt
mobile less than 5 miles away.

I could do the same with a 10" screw driver by just sliding it up and
down the guy. The end of that guy was grounded' too.

OTOH you are rarely listening while transmitting on HF so the noise
probably wouldn't bother on receive (unless your neighbor is trying to
listen to the AM broadcast bandG)

Roger Halstead (K8RI & ARRL life member)
(N833R, S# CD-2 Worlds oldest Debonair)
www.rogerhalstead.com

I get consistent 9+5, 9+10 reports on 40m out 500miles with this setup on
10watts!!!!!! YMMV
73
greg
WG8Z

--------------------------------------------------------------------------
------
my back yard is fenced(102 ft by 35 ft. chain link woith dug in
posts every 7 or 8 ft
could this be used as a counterpoise or as a ground?

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Link web site for ham radio	Bill Clarke	Antenna	0	June 21st 04 02:23 AM
What Chain stores or local in Puget sound carry 300/450 ohm twinlead	R. Scott	Antenna	4	November 21st 03 03:48 PM
Distance to Link Coupling in a Loop Antenna	Al	Antenna	6	October 28th 03 12:02 AM
Link coupling to a rotary incuctor	T.E.O	Antenna	0	July 25th 03 12:43 PM

All times are GMT +1. The time now is 10:11 PM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017