Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Brian Reay wrote in :
Ralph Mowery wrote: wrote in message ... In rec.radio.amateur.antenna gareth wrote: What's the solution to soldering through to the underlying braid in a PL259 if the only soldering iron small enough to engage the holes is a low-power jobbie? Buy or borrow tools appropriate to the task. That is the way to do it. Get a big soldering iron that will really put the heat to it. I have used a Weller soldering gun in the past, but now use a 100 watt iron. I bought a used one at a hamfest. I think you can get some at the Hobby Lobby store if in the US. They sell them to people that make things out of leaded glass sort of like the old church windows. An old Solon, ex BT, iron is ideal, I think they are about 50W but the key thing is they have a decent sized bit. That means a good thermal mass to get the plug up to temp. quickly. Mine was 65W, IIRC. Haven't seen it for a while; I think it's out in the garage. And yes, they are polarised. I can remember holding and staring at something I was about to solder and reaching out for the iron without looking. Picked it up by the wrong end. You only do that once! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Tube socket holes | Homebrew | |||
Female PL259? | Antenna | |||
RCA - PL259 (female)? | Shortwave | |||
Metric PL259? | Homebrew | |||
PL259 Query | Homebrew |