Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old October 15th 15, 09:15 AM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Sep 2012
Posts: 1,382
Default The little holes in PL259

"Jim GM4DHJ ..." wrote in message
...

"rickman" wrote in message
...
On 10/14/2015 3:08 PM, Stephen Thomas Cole wrote:
"gareth" wrote:
What's the solution to soldering through to the underlying braid in a
PL259
if the only
soldering iron small enough to engage the holes is a low-power jobbie?

Perchance the solution lies in using a junior hacksaw to make a slot
between
two of the holes
so the big iron can get in there?

This is for an outdoors connection, so I want to ensure that it is
sound.

Gareth Alun Evans G4SDW, four decade plus radio amateur, lifelong
pursuer
of "technical excellence", and "polymath".

Jesus wept.


This was a nice little discussion until you showed up. What is your
intent exactly?


Rick

wrecking as usual...Someone who knows him told me he was running a book on
the demise of the sick Scottish nurse.......


A survey of the posts from STC over the past 3 years will find nothing of
value,
even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described
him as a narcissistic sociopath.



  #2   Report Post  
Old October 15th 15, 09:25 AM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Apr 2015
Posts: 165
Default The little holes in PL259


"gareth" wrote in message
...
"Jim GM4DHJ ..." wrote in message
...

"rickman" wrote in message
...
On 10/14/2015 3:08 PM, Stephen Thomas Cole wrote:
"gareth" wrote:
What's the solution to soldering through to the underlying braid in a
PL259
if the only
soldering iron small enough to engage the holes is a low-power jobbie?

Perchance the solution lies in using a junior hacksaw to make a slot
between
two of the holes
so the big iron can get in there?

This is for an outdoors connection, so I want to ensure that it is
sound.

Gareth Alun Evans G4SDW, four decade plus radio amateur, lifelong
pursuer
of "technical excellence", and "polymath".

Jesus wept.

This was a nice little discussion until you showed up. What is your
intent exactly?


Rick

wrecking as usual...Someone who knows him told me he was running a book
on the demise of the sick Scottish nurse.......


A survey of the posts from STC over the past 3 years will find nothing of
value,
even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described
him as a narcissistic sociopath.




which he is ....


  #3   Report Post  
Old October 15th 15, 09:49 AM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jan 2014
Posts: 329
Default The little holes in PL259

"gareth" wrote:
"Jim GM4DHJ ..." wrote in message
...

"rickman" wrote in message
...
On 10/14/2015 3:08 PM, Stephen Thomas Cole wrote:
"gareth" wrote:
What's the solution to soldering through to the underlying braid in a
PL259
if the only
soldering iron small enough to engage the holes is a low-power jobbie?

Perchance the solution lies in using a junior hacksaw to make a slot
between
two of the holes
so the big iron can get in there?

This is for an outdoors connection, so I want to ensure that it is
sound.

Gareth Alun Evans G4SDW, four decade plus radio amateur, lifelong
pursuer
of "technical excellence", and "polymath".

Jesus wept.

This was a nice little discussion until you showed up. What is your
intent exactly?


Rick

wrecking as usual...Someone who knows him told me he was running a book on
the demise of the sick Scottish nurse.......


A survey of the posts from STC over the past 3 years will find nothing of
value,
even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described
him as a narcissistic sociopath.


Gotten to.

--
STC // M0TEY // twitter.com/ukradioamateur
  #4   Report Post  
Old October 15th 15, 02:55 PM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Sep 2012
Posts: 1,382
Default The little holes in PL259

"gareth" wrote in message
...
A survey of the posts from STC over the past 3 years will find nothing of
value,
even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described
him as a narcissistic sociopath.


And being a sociopath, he will not be consciously aware of the manner in
which
his behaviour is seen as aggressive and destructive, and in response to any
criticism will
latch on to that criticism as the attention that he so desperatey seeks by a
further issue
of abusive remarks.



  #5   Report Post  
Old October 15th 15, 03:15 PM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Sep 2015
Posts: 62
Default The little holes in PL259

"gareth" wrote in message
...
"gareth" wrote in message
...
A survey of the posts from STC over the past 3 years will find nothing of
value, even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described him as a narcissistic sociopath.


And being a sociopath, he will not be consciously aware of the manner in
which his behaviour is seen as aggressive and destructive, and in response
to any criticism will latch on to that criticism as the attention that he
so desperatey seeks by a further issue of abusive remarks.



More "Freudian Projection" on your part, old Bean?
--
;-)
..
73 de Frank Turner-Smith G3VKI - mine's a pint.
..
http://turner-smith.uk



  #6   Report Post  
Old October 15th 15, 09:06 PM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Sep 2012
Posts: 1,382
Default The little holes in PL259

"gareth" wrote in message
...
"gareth" wrote in message
...
A survey of the posts from STC over the past 3 years will find nothing of
value,
even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described
him as a narcissistic sociopath.


And being a sociopath, he will not be consciously aware of the manner in
which
his behaviour is seen as aggressive and destructive, and in response to
any criticism will
latch on to that criticism as the attention that he so desperatey seeks by
a further issue
of abusive remarks.


QED


  #7   Report Post  
Old October 15th 15, 09:05 PM posted to uk.radio.amateur,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jan 2014
Posts: 329
Default The little holes in PL259

"gareth" wrote:
"gareth" wrote in message
...
"gareth" wrote in message
...
A survey of the posts from STC over the past 3 years will find nothing of
value,
even a confusion between sidetone and sideband,
but hundreds of gratuitously abusive remarks; remarks for which someone
described
him as a narcissistic sociopath.


And being a sociopath, he will not be consciously aware of the manner in
which
his behaviour is seen as aggressive and destructive, and in response to
any criticism will
latch on to that criticism as the attention that he so desperatey seeks by
a further issue
of abusive remarks.


QED


NIP?

--
STC // M0TEY // twitter.com/ukradioamateur
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tube socket holes JIMMIE Homebrew 5 March 27th 10 03:07 PM
Female PL259? Dave Platt Antenna 6 September 5th 06 12:28 PM
RCA - PL259 (female)? Lisa Simpson Shortwave 5 June 14th 06 09:00 PM
Metric PL259? Airy R. Bean Homebrew 26 August 30th 04 12:16 PM
PL259 Query Airy R. Bean Homebrew 2 August 9th 04 02:24 PM


All times are GMT +1. The time now is 12:44 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017