Home |
Search |
Today's Posts |
#1
|
|||
|
|||
T2FD: keeping the spreaders in place
On my T2FD I used 1/2" electrical plastic pipe for spreaders.
The wire is rather thick: 4 mm^2 conductor section, stranded, PVC-insulated. At the moment, spreaders are tied in place with copper telephone twisted pair. I am planning to fill the pipes with urethane foam to keep water - and especially the bugs - out of them. Urethane should also bond well with the PVC insulation on wires, allowing me to remove the ugly twisted pair, but I am not sure. How do you suggest to keep the spreaders in place? tnx es 73 de n1jpr/i2 http://filippo.ru.ru |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Dead Serious T2FD: HV Insulation, EMP Arrestors, extra Coax Choke? | Antenna | |||
T2FD modded to add LF, no switching, AM BC rejection | Antenna |