In article , says...

Ralph Mowery posted for all of us...



Look for a MFJ 4601

This link has a video showing how it works.


http://www.gigaparts.com/Product-Lin...MFJ-4601.html?
gclid=CjwKEAjw-
Oy_BRDg4Iqok57a4kcSJADsuDK1fKzxhfswaQQhmxRiMMfAkFO ZSikn059-
1pshYzBSIhoCo57w_wcB

Thanks for the reply; not to be critical but I don't know how to seal the
gap where the the lower and upper sashs' are offset.

One thing you coluld try would be to get some of the foam rubber type
stuff that is made to insulate the water pipes. Stuff it in the crack
and cut to the length you need.

On 10/11/2016 3:11 PM, Ralph Mowery wrote:
In article , says...

Ralph Mowery posted for all of us...



Look for a MFJ 4601

This link has a video showing how it works.


http://www.gigaparts.com/Product-Lin...MFJ-4601.html?
gclid=CjwKEAjw-
Oy_BRDg4Iqok57a4kcSJADsuDK1fKzxhfswaQQhmxRiMMfAkFO ZSikn059-
1pshYzBSIhoCo57w_wcB

Thanks for the reply; not to be critical but I don't know how to seal the
gap where the the lower and upper sashs' are offset.

One thing you coluld try would be to get some of the foam rubber type
stuff that is made to insulate the water pipes. Stuff it in the crack
and cut to the length you need.

That's how they do it to seal for window air conditioner units.

--

Rick C