| Home |
| Search |
| Today's Posts |
|
#21
|
|||
|
|||
|
"Yeah" wrote in message ... "A-Tech" wrote in message news ![]() Hi, I am a newbie here and have just dropped in to ask a single technical question. Living as I do in a suburban area, I use an FM antenna to draw the stations located in a certain vector from me. A station of interest is located at 107.1MHz but is interfered with by an off-axis stronger signal at 106.9MHz Hi Bryce, you can try phase cancellation technique as described at http://www.geocities.com/toddemslie/...ncellation.htm Good luck! Mario 9A4DE This *IS* simply another way of describing an antenna with a null. -- Steve N, K,9;d, c. i My email has no u's. |
|
#22
|
|||
|
|||
|
Hi, Mario
Thank you for this response. Of all the replies that I received, you came closest to the information I was looking for. Even those recommending "phased arrays" failed to point me toward practical information. I have the tech-savy to build the circuits shown in your link and to understand the theory. Thanks again. ....Bryce "A-Tech" wrote in message I am a newbie here and have just dropped in to ask a single technical question. Living as I do in a suburban area, I use an FM antenna to draw the stations located in a certain vector from me. A station of interest is located at 107.1MHz but is interfered with by an off-axis stronger signal at 106.9MHz Hi Bryce, you can try phase cancellation technique as described at http://www.geocities.com/toddemslie/...ncellation.htm Good luck! Mario 9A4DE |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Low Pass Filter ?? | Antenna | |||
| Digital cable filter spam | Antenna | |||