Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]() Roy Lewallen wrote in message ... ...pirated copy of EZNEC. That is an absolute lie! My disk is an original - with a large, black, bold, italicized EZNEC at the top of its label - and the party from whom I acquired it, gave it to me with your full knowledge and approval. I can only assume this lie is an egregious and deliberate attempt on your part to defame. I will not discuss this further in public. I made Chuck an offer a while back, as follows: That if he has the Raibeam tested at a certified antenna range and the results show a free-space gain of at least 5.5 dBd (7.65 dBi) with simultaneous 25 dB or greater f/b ratio, I'll pay the test fee. This is performance less than he claims and less than he claims his model shows. But so far he hasn't taken me up on the offer. It's rather moot, now that I am no longer in business. However, If it's your desire to spend money to embarrass yourself, I won't argue. There were two reasons why I let your offer slide. First, I was unaware of any testing facilities in my area, and second, I was struggling to meet customer demand and could not justify spending the time to develop a unit for UHF, since it was my understanding that most testing facilities could not accommodate frequencies lower than 100 MHz or so. I've since learned that the US Army testing range at Fort Huachuca in Tucson, AZ is open to civilian testing, and they can accommodate frequencies as low as 50 MHz. My wife will finish her chemotherapy and radiation treatments in March, and since she is quite ill, I cannot foresee my being available until after that time. Allowing say 30 days or so for me to prepare an antenna, I invite you to make the arrangements in Tucson - say April - May, 2005 or so - and I will be more than happy to join you there. Is this agreeable? Chuck, WA7RAI |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Stainless steel antenna wire | Antenna | |||
EZNEC v. 4.0 at Dayton | Antenna | |||
Adding lengths to bare wire antenna? | Antenna | |||
3 antennas modeled with EZNEC | Antenna | |||
randon wire newbie question | Antenna |