Menu

physical/intuitive understanding of RL/RC time constants?

Search this Thread

Prev

Previous Post

Next Post

Next

#19

Report Post

Old

October 14th 04, 04:11 AM

John Larkin

Posts: n/a

Default

On 11 Oct 2004 16:11:16 -0700, (Alan Horowitz)
wrote:

when a current just starts flowing into a RL or RC circuit, how does
the voltage "know" that it should be increasing exactly 63% during
each time-constant period?

And whence the number 63%?

How about this:

Charge a 1 farad capacitor to 1 volt and slap a 1 ohm resistor across
it. The resistor current is 1 amp, so the cap discharges, and the
voltage is at first declining at a rate of 1 volt per second. But
1/100 of a second later, the voltage is 0.99 volts, so the current is
only 0.99 amps, so the rate of discharge is only 0.99 volts per
second.

So we write a Basic program:

v = 1 ' charge the cap

for t = 1 to 100 ' then, for 1 second at 0.01 sec steps,

v = v - 0.01 * v ' discharge the cap by 1%

next

print v ' voltage is this, 1 second later

which simulates what I was doing above, but for a full second. The
value of v at the end is 0.36603 volts. That's close to 1/e, not exact
because I took 100 discrete steps, as an approximation to
continuous-time math. With 1000 steps, simulating 1 second of
discharge in 1 millisecond steps, you get 0.367700, even closer.

'e' is just nature's answer to a natural discharge curve.

John

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

All times are GMT +1. The time now is 04:39 AM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017