Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() And in which ARRL publication might I find this information? John Since 1953 Belrose article in QST, in all ARRL Antenna Books and Handbooks it is shown that current across the loading coil (mobile or loaded antennas) is uniform, while ON4UN Low Band DXing shows and explains it right. I will have some more samples modeled with EZNEC and one of these days comprehensive article on the subject. Jus' need some free time. Yuri |
#2
![]() |
|||
|
|||
![]()
"Yuri Blanarovich" wrote in message
... And in which ARRL publication might I find this information? John Since 1953 Belrose article in QST, in all ARRL Antenna Books and Handbooks it is shown that current across the loading coil (mobile or loaded antennas) is uniform, while ON4UN Low Band DXing shows and explains it right. I will have some more samples modeled with EZNEC and one of these days comprehensive article on the subject. Jus' need some free time. Yuri No, I meant in which ARRL publication can I find either ON4UN's or your article correcting the last 50 years of "misinformation?" John |
#3
![]() |
|||
|
|||
![]() No, I meant in which ARRL publication can I find either ON4UN's or your article correcting the last 50 years of "misinformation?" John So far the stuff is on my and W5DXP web site, more coming soon as soon as weather and QRL gets more friendly. Stay tuned or do your own measurements. Yuri |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lumped Load Models v. Distributed Coils | Antenna | |||
Current in antenna loading coils controversy | Antenna | |||
Eznec modeling loading coils? | Antenna |