Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
Tom Donaly wrote:
Cecil Moore wrote: Heh, heh, so you don't believe there is a current drop between the current maximum point and current minimum point on a transmission line with reflections? Seems to me going from 2 amps at a current maximum to 0.1 amps at a current minimum is a measurable drop in total current. Next, Cecil, you're going to be talking about a "current gradient" and a "scalar current field." Here's a question for you, Cecil, and Richard Harrison, and Yuri, too: how do you take the gradient of the current at a point on a transmission line, and, if were possible to do so, what is the physical significance of the result? A total current gradient obviously exists on a transmission line with current minimums and maximums. You can locate those points with a simple pickup loop. The current gradient is caused by the superposition of forward and reflected current waves as described in any transmission line textbook. "Taking the gradient" seems to me to be unnecessary and just a logical diversion away from the qualitative conceptual discussion. -- 73, Cecil http://www.qsl.net/w5dxp ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lumped Load Models v. Distributed Coils | Antenna | |||
Current in antenna loading coils controversy | Antenna | |||
Eznec modeling loading coils? | Antenna |