Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]() "Cecil Moore" wrote in message ... Jimmie wrote: What, Coililng the wire has nothing to do with how well it does or does not radiate, only with how the radiation is summed into the total field. The current distribution in a loading coil should be very similar to the current distribution in the secton of antenna it is replacing. Actually, coiling the wire tends to reduce the far-field radiation because much of the near-field(s) cancel each other. The currents on each side of the coil are traveling the opposite direction in much the same way they do in a transmission line. However, that doesn't mean the currents at the bottom and top of the coil are identical. The magnitude of the total current at the bottom and top of the coil depends in large amount on the phase shift through the coil. -- 73, Cecil http://www.qsl.net/w5dxp Just because it is canceld in the far field does not mean the coil did not radiate. I would not even say it is canceled in the far field although this is a convenent way of looking at radiation. All you can really say for sure is that the out of phase voltages in the receiving antenna combine destructively. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lumped Load Models v. Distributed Coils | Antenna | |||
Current in antenna loading coils controversy | Antenna | |||
Eznec modeling loading coils? | Antenna |