Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
ldagan wrote on 8/6/2017 7:17 AM:
Hello all. If we assume that the antenna's surrounding is air, then my assumption is that dielectric losses for the antenna are rather negligible. What type of antennas are usually showing higher effect of ohmic losses? I mean, I know that reflector antennas are usually little susceptible to ohmic losses. But some types are not, my assumption would be loop antennae, Another thing is attenuation in waveguides. I assume that it would be the case with many tens of GHZ, for rectangular device. But, as I am only guessing, as I have been out of the game for long. Small loop antenna work with large currents and so suffer from ohmic losses more than many other types. -- Rick C |
#2
![]() |
|||
|
|||
![]()
first of all, thanks.
I mean, yes, currents are higher, but I was talking in relative terms, not absolute terms. I mean, reflectors and horn antennas can send very strong currents, or are you referring to high current density? -Lior |
#3
![]() |
|||
|
|||
![]()
ldagan wrote on 8/6/2017 1:40 PM:
first of all, thanks. I mean, yes, currents are higher, but I was talking in relative terms, not absolute terms. I mean, reflectors and horn antennas can send very strong currents, or are you referring to high current density? The current density depends on your design. If you use a very small conductor for a loop the density will be higher than if you use a large conductor. But in both cases the current in the conductor will be much higher than in many other antenna types. -- Rick C |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Microstrip formula for non-standard geometry | Antenna | |||
Window ladder line losses ton environment vs coax losses | Antenna | |||
Microstrip dimension | Homebrew | |||
Microstrip PCB antenna for 2.4 GHz WLAN | Antenna | |||
microstrip antenna | Antenna |