Home |
Search |
Today's Posts |
#8
|
|||
|
|||
Knarf wrote:
Could not get it to work. Below is my NEC2 code ( heavily segmented as it is easier to figure out where to place the source and load). What am I doing wrong? Resonant on 7.25 MHz before extending the antenna. Approaches resonance on 22 MHz, when extended, with very high series L. A 40 m dipole is resonant on the 3rd harmonic anyway so all you are doing is isolating the extra 1/4 wave by placing a very high impedance at the quarter wave point. I guess I missed something, be interested in any comments. The lumped point inductance will definitely not give the correct results. The coil needs to use the helix feature of EZNEC+ 4.0. I constructed an 8-sided coil out of segments in EZNEC 2.0 and the results can be viewed at: http://www.qsl.net/w5dxp/octcoil2.gif The dimensions and inductance are not perfect but the idea is perfectly clear. There's 0.11 amp at the bottom of the coil and 0.57 amps at the top of the coil. By playing with lengths of wire and frequency, I've seen the current at the bottom of the coil as low as 0.005 amps while the current at the top of the coil was about 0.6 amps. -- 73, Cecil http://www.qsl.net/w5dxp ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Current in antenna loading coils controversy | Antenna |