Roy Lewallen wrote:
Most of the available implementations of NEC-2 include the ability to
generate a helix. Look for information on a 'GH' command.

Some time ago, I generated an 8-sided coil for EZNEC 2.0. It was a
lot easier than I thought at first. Here's one turn of dia=13" at
about one turn per inch. Note 'y' always equals the x value from two
lines up.

x y z
.5, .2, 4.00
.2, .5, 4.01
-.2, .5, 4.02
-.5, .2, 4.03
-.5, -.2, 4.04
-.2, -.5, 4.05
.2, -.5, 4.06
.5, -.2, 4.07

--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---