Dhakala wrote:
Thanks for the advice. Why would it be easier to cut the insulation
from the inside of 300 ohm ladder-line wire than from flat antenna wire?

Because more than half has been chopped out already. You can cut
the ladder-line at a place where there's no center insulation and
have one inch wire tails needing only a wire stripper. If you
need longer wire tails than that, you only need to cut out about
1/4" of center insulation with an Exacto knife to achieve two inch
wire tails.
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---