Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
"carl wesser" wrote in message
... the boom is about 14 feet, I'm going back and get all sizes.. of the 4 elements ,,2 appear to be identical, although I can only see where 3 elements were attached to boom, the owner said" all 4 "were on boom when he took it apart thanks Carl =================== Tam has a good point, since the Hy-Gain TH3 has a 14 foot boom, you can start with its manual (adobe acrobat) http://www.hy-gain.com/man/pdf/TH-3MK4.pdf Hy-gain now calls the "hairpin match" a beta match (the match does make a "fourth" connection to the boom) - this match has changed a bit from early models. Also remember that the TH3 does not have a supplied balun. Again, pay close attention to the type of brackets, swaging, etc. in the manual versus your parts This should identify it as a HyGain antenna w9gb |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
To Bob Miller; re Your Answer To My Balun Quest. | Antenna |