| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Richard Clark wrote:
. . . I will add a proviso in that the Source represented by EZNEC, and presumably by extension NEC, has no characteristic Zc; or rather I am not aware of its value. . . I'm not sure what Zc is, but NEC sources have a definite, well-defined internal impedance: Zero. EZNEC gives you the choice of voltage sources, which are the same as NEC sources, with an impedance of zero; and current sources, which have an impedance of about 10^15 ohms -- infinite, for practical purposes. Roy Lewallen, W7EL |
|
#2
|
|||
|
|||
|
On Thu, 25 Nov 2004 14:47:40 -0800, Roy Lewallen
wrote: I'm not sure what Zc is, but NEC sources have a definite, well-defined internal impedance: Zero. EZNEC gives you the choice of voltage sources, which are the same as NEC sources, with an impedance of zero; and current sources, which have an impedance of about 10^15 ohms -- infinite, for practical purposes. Hi Roy, You are too modest by half, you are sure. Such a source makes for the explicit source of Mismatch Uncertainty. 73's Richard Clark, KB7QHC |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 50 ohm - 5 foot long - Slotted line. | Antenna | |||
| Length of Coax Affecting Incident Power to Meter? | Antenna | |||