Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 1st 04, 04:06 AM
 
Posts: n/a
Default Sucoflex and wireless adapter

I was trying to add an SMA bulkhead to my dlink dwl-120 802.11b wireless adapter but i cut the antenna lead they had on it too short and screwed up soldering and the lead broke and now I don't have any antenna lead to re-solder. Does anyone know what kind of wire they use on external usb adapters for the antenna lead? Is it sucoflex? It was very thin wires surrounded by a sheilding material then surounded by some thready type material to give it some stiffness.

-Thanks
John



  #2   Report Post  
Old December 1st 04, 07:08 AM
Lee Hopper
 
Posts: n/a
Default

John wrote:
I was trying to add an SMA bulkhead to my dlink dwl-120 802.11b wireless adapter but i cut the antenna lead they had on it too short and screwed up soldering and the lead broke and now I don't have any antenna lead to re-solder. Does anyone know what kind of wire they use on external usb adapters for the antenna lead? Is it sucoflex? It was very thin wires surrounded by a sheilding material then surounded by some thready type material to give it some stiffness.

-Thanks
John


Could it be litz wire? http://www.mwswire.com/litzmain.htm for one.

-NB7F


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 03:54 PM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017