| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
"Ian Jackson" wrote , Richard Clark writes By the same logic (and experience), charge will accumulate on the surface at the smallest radius - hence the points on lightning rods. By extension, this is also the source of capacitor failure at either the edges (smallest radius of a plate) or in surface burrs. Again scraping the very bottom of the memory banks, I seem to recall that when lightning rods were first used (in the late 1700s), the British used sharp points. The French, in the spirit of one-upmanship, decided that theirs should have brass balls. DOH!!! Ian. -- Very interesting! However the American Benjamin Franklin's pointed lightning rods (it was not a British design) was never scientifically challenged until a couple of years ago. Scientists have now shown that blunt-tipped air terminals are attached by lightning with significantly higher frequency than sharp tipped rods are. Pretty amazing that it took over 230 years to "discover" this! So scrap the concept that a sharp edge attracts charges, at least it does not attract lighting, the ultimate charge. http://www.usatoday.com/weather/reso...-rod-tests.htm http://www.esdjournal.com/articles/f...n/franklin.htm http://www.mikeholt.com/news/archive...tningblunt.htm etc, etc Jack Painter Virginia Beach VA |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Automotive Diversity Reception problems- 98 Corvette | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| How to connect external antenna to GE Super Radio III | Antenna | |||
| Review: Amateur Radio Companion 3rd Edition | Antenna | |||
| Reception in a tin can | Antenna | |||