| Home |
| Search |
| Today's Posts |
|
#5
August 28th 03, 05:26 AM
|
|||
|
|||
Cliff Gieseke wrote:
Does anyone still use a folded dipole with an appropriate impedance matching balun today? Not the broadband type that B & W sells, but the old monoband basic folded dipole, that many operators used 50 years ago. ??? Most hams use a 4:1 balun with a folded dipole instead of the more complicated 6:1 balun. "300 ohm" window line usually has a Z0 less than 300 ohms. The stuff I have is about 275 ohms. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Vee vs. Dipole | Antenna | |||
| 50 ohm or 75 ohm cable foe dipole? | Antenna | |||
| Moonraker MTD-3 Dipole is it any good? | Antenna | |||
| Dipole connected to grounded receiver? | Antenna | |||
| Dipole questions | Antenna | |||
Threaded Mode
