| Home |
| Search |
| Today's Posts |
|
#11
September 10th 03, 03:13 AM
|
|||
|
|||
"Dr. Slick" wrote:
wrote in message ... The passive network you provided in your first post fulfills this requirement if you define 'power RC' as |rho|^2. I disagree that the voltage RC will be greater than 1. The tricky part is measuring this correctly, because you would need an SWR meter that is calibrated for the same Z as Zo. It is not nearly that tricky. 'Revised' rho, as you state, predicts 0 Volts across the capacitor. This will be easy to measure with any AC voltmeter that can handle your test frequency. I predict, using circuit theory, that if you excite the test circuit with a 1 Volt sinusoid at a frequency that makes the impedances j200 and -j200, that you will measure 4 Volts across the capacitor, not 0. This aligns with the result expected from 'classic' rho. ....Keith PS Please consider dispensing with the insults. They do not further the discussion and are quite unbecoming. |
Threaded Mode
