LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old October 15th 03, 11:34 PM
Richard Clark
 
Posts: n/a
Default

On Wed, 15 Oct 2003 17:18:06 -0400, "Tarmo Tammaru"
wrote:

Richard,

I hope you are not mixing up analog steady state signals and reflections of
pulses. The re reflection of a signal at a source depends not only on the
impedance, but also on the voltage at the source.

Tam/WB2TT


Hi Tam,

Found within the body of what I posted:

Then of course there is more in Chapter 8
Chapter 8. Section 8.8 "Multiple Reflections."
This material shows the transient analysis and sets up the steady
state analysis already anticipated above in Chapter 9.


Didn't you say you studied under Chipman? This is HIS material, not
my derivations. Again, if I were wrong, there are enough copy holders
here to correct me. That has not come to pass in lo' these several
months.

73's
Richard Clark, KB7QHC
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re-Normalizing the Smith Chart (Changing the SWR into the Richard Harrison Antenna 58 September 3rd 03 04:49 AM
Re-Normalizing the Smith Chart (Changing the SWR into thesame... Richard Harrison Antenna 99 August 30th 03 06:26 PM
Re-Normalizing the Smith Chart (Changing the SWR into the same load) Dr. Slick Antenna 98 August 30th 03 03:09 AM
Re-Normalizing the Smith Chart (Changing the SWR intothesame... Richard Harrison Antenna 7 August 24th 03 01:45 AM
Length of Coax Affecting Incident Power to Meter? Dr. Slick Antenna 140 August 18th 03 08:17 PM


All times are GMT +1. The time now is 11:28 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017