Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
....its not as easy as that though. See, I know that it filters out the
desired frequency, but I was wondering HOW its does it. I understand that as the RF waves hit the antenna, they cause free electrons on the antenna to go up and down, and this electrical current (as movement of electrons causes) is then rectified and amplified (talking simply now), and pumped out to the speaker. For this example, I think it would be best to stick with a really simple radio, operating with an Amplitude Modulation. I imagine the free electrons on the antenna to be very much like a bouy bouncing around on the sea - going up and down. If there was only one continuous sinusoidal wave hitting that electron, then it'll be going up and down quite simply. But then the voice and music we hear is modulated into that sine wave, so the electron is going up and down, plus "wibbling" about because of the modulated speech. Taking the bouy example again, I imagine a tuner very much like a telescope looking at the bouy, and the telescope bouncing up and down at the same rate. What I should see looking through the telescope is the bouy bouncing up and down slightly according the music and voice that has been modulated into it - the carrier wave has been cancelled out because the telescope and bouy are moving up and down at the same frequency. This sounds all right, but if I then continue to take this analogy further, the bouy (or electron) is moving up and down to MANY frequencies. So even if I am bouncing up and down at the desired frequency, the chances of me seeing the bouy in the right place because of all the other frequency waves are probably nil. Also, how does the tuner stay in phase with that broadcast, when there are no synchronisation going on? To round up, the question is this: how can the tuner only select those electrons that are ONLY vibrating at the required frequency, when logic states that the electron must be bouncing around at the combined, additive effect of all RF waves hitting it! Anyone care to have a go and answer? Cheers. Paul. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Antenna question | Shortwave | |||
significance of feedline orientation | Shortwave | |||
Antenna analysis | Antenna | |||
FC-20 Antenna Tuner broken on 10m ? | Antenna |