LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old January 21st 05, 08:10 PM
Paul Hardwick
 
Posts: n/a
Default Basic Question: How does an antenna tuner work?

....its not as easy as that though. See, I know that it filters out the
desired frequency, but I was wondering HOW its does it.

I understand that as the RF waves hit the antenna, they cause free electrons
on the antenna to go up and down, and this electrical current (as movement
of electrons causes) is then rectified and amplified (talking simply now),
and pumped out to the speaker. For this example, I think it would be best
to stick with a really simple radio, operating with an Amplitude Modulation.

I imagine the free electrons on the antenna to be very much like a bouy
bouncing around on the sea - going up and down. If there was only one
continuous sinusoidal wave hitting that electron, then it'll be going up and
down quite simply. But then the voice and music we hear is modulated into
that sine wave, so the electron is going up and down, plus "wibbling" about
because of the modulated speech. Taking the bouy example again, I imagine a
tuner very much like a telescope looking at the bouy, and the telescope
bouncing up and down at the same rate. What I should see looking through
the telescope is the bouy bouncing up and down slightly according the music
and voice that has been modulated into it - the carrier wave has been
cancelled out because the telescope and bouy are moving up and down at the
same frequency.

This sounds all right, but if I then continue to take this analogy further,
the bouy (or electron) is moving up and down to MANY frequencies. So even
if I am bouncing up and down at the desired frequency, the chances of me
seeing the bouy in the right place because of all the other frequency waves
are probably nil.

Also, how does the tuner stay in phase with that broadcast, when there are
no synchronisation going on?

To round up, the question is this: how can the tuner only select those
electrons that are ONLY vibrating at the required frequency, when logic
states that the electron must be bouncing around at the combined, additive
effect of all RF waves hitting it!

Anyone care to have a go and answer?

Cheers.

Paul.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Antenna question Jon Lippert Shortwave 3 December 15th 04 06:45 PM
significance of feedline orientation Brian Shortwave 6 October 22nd 04 01:43 AM
Antenna analysis Jack Twilley Antenna 28 March 18th 04 12:17 AM
FC-20 Antenna Tuner broken on 10m ? Simon Antenna 3 January 28th 04 12:45 AM


All times are GMT +1. The time now is 09:20 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017