Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Justín Käse" wrote in message news:41ff890e.3015801@chupacabra... Has anyone converted one of the old center loaded magnet mount CB antennas from Radio Shack to 6 meters? This is one of the ones with a large (soda can size) loading coil and a fairly large (approx 7") magnet plate. Currently I have it on the roof of this apartment using an old computer case for stability and a strip of plumbers tape for a counterpoise. I had to trim about an inch and a half to get it resonant at 28.4 Mhz, and am thinking of taking it down a few more inches to use on 6 meters. Would I need to also adjust the length of the counterpoise strip accordingly, or would the radiator only use as much as needed for resonance, and disregard the rest, like as if it were mounted on a large roof vehicle? -- If you can get inside the coil housing and short-out some of the windings, you may have a better radiator. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Updated Summer Schedule for Bible Voice Broadcasting | Shortwave | |||
Bible Voice Broadcasting A04 | Shortwave | |||
FA: Unbuilt Heathkit 10 meter Conversion Kit for SB-221 | Swap |