LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old February 1st 05, 04:00 AM
Hal Rosser
 
Posts: n/a
Default


"Justín Käse" wrote in message
news:41ff890e.3015801@chupacabra...
Has anyone converted one of the old center loaded magnet mount CB
antennas from Radio Shack to 6 meters? This is one of the ones with a
large (soda can size) loading coil and a fairly large (approx 7") magnet
plate. Currently I have it on the roof of this apartment using an old
computer case for stability and a strip of plumbers tape for a
counterpoise. I had to trim about an inch and a half to get it resonant
at 28.4 Mhz, and am thinking of taking it down a few more inches to use
on 6 meters. Would I need to also adjust the length of the counterpoise
strip accordingly, or would the radiator only use as much as needed for
resonance, and disregard the rest, like as if it were mounted on a large
roof vehicle?
--


If you can get inside the coil housing and short-out some of the windings,
you may have a better radiator.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Updated Summer Schedule for Bible Voice Broadcasting Mike Terry Shortwave 0 May 20th 04 07:17 AM
Bible Voice Broadcasting A04 N8KDV Shortwave 0 March 19th 04 11:43 PM
FA: Unbuilt Heathkit 10 meter Conversion Kit for SB-221 W8KZW Swap 0 December 16th 03 01:09 PM


All times are GMT +1. The time now is 06:01 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017