LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #13   Report Post  
Old February 5th 05, 04:14 PM
Galilea
 
Posts: n/a
Default

First of all, my apologies. As you can gather it is the first time I post in
this newsgroup. In the process, the computer kept on telling me that I
required authentification (I had forgotten to click on one of the boxes) and
said that it could not send the message. I therefore ended up writting it
several times. As it turned out, two of the times where it told me it had
not sent it, it had. I greatly apologise for all the inconvenience.

Secondly, yes, I mean to say the signal has a DC component. I would have
thought that impulsive noise, being cause by electron movement would produce
an AC signal, otherwise where does the DC come from? The importance of the
time is because I would have thought that in the long term the antenna would
resonate so as to produce a zero mean signal (AC). Sorry, the answer might
be common sense but I just fail to see it.

Thank you for your time and once again, sorry.


"Galilea" wrote in message
...
Hello, thank you for reading this post.

When analysing wideband impulse signals from a wideband antenna I have
realised that the average signal magnitude is not zero. I have thought

this
is because the reactance of the antenna at different frequencies varies

and
since it is a wideband antenna there can be energy measured since it is

only
for an extremely small period of time of 2-4 us. However, I am not sure

and
would greatly appreciate the views of this newsgroup.




 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
average signal amplitude Galilea Antenna 1 February 5th 05 12:19 PM
GRAYLAND 2004 FALL DXPEDITION: Compiled Logs for Oct 15-17 (Part 1) 4nradio Shortwave 4 November 1st 04 10:44 PM
power output formula Ken Scharf Homebrew 62 October 11th 04 05:41 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 03:01 PM


All times are GMT +1. The time now is 06:52 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017