Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
For the first time in many years I have been listening a lot on the low
bands (160/80/40). It seems there is much more background noise than when I was in my teens, but that may be my selective memory at work. I am in the far suburbs trying to use a half-sloper and an inverted V -- both with the peak at about 53 feet. I think most of the noise is "natural" (except for a 15Khz harmonic every now and then.) I started reading about small loops for receiving on 160 and 80. In particular I have been reading about: (1) the 4-turn loop on 4-foot cross arms (W1FB), (2) the 4-turn coax loop (in a 9-inch diameter) (W1FB), (3) an 18-inch ferrite rod unit described by G2BZQ All of these were described as better receiving antennas "in the house" than the authors' more conventional outside antennas. W1FB thought the 9-inch loop was better than the 4-foot unshielded loop and apparently did not think much of ferrite-stick antennas. What is the experience of those on this newsgroup? Are these antennas really better (in the house, and even in the basement) than conventional outdoor antennas? Are they significantly better when used outside and perhaps elevated a bit? I realize they are inconvenient because they must be tuned even for small frequency changes. It seems they are very directional for nulls but fairly broad for other responses. Is the same loop good for 160 and 80 (and maybe even 40)? Bill W2WO |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FCC: Broadband Power Line Systems | Policy | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Major error found in my small coax loops | Antenna | |||
Base Closures | Shortwave |