Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]() Caveat Lector wrote: I suspect you have a Cushcraft 6M 1/2 wave AR-6 Ringo If so the manual is on their site http://www.cushcraft.com/support/pdf/951285.pdf And NO don't add radials for this model -- it is self contained Except for the beads on the feedline. Ringos are *notorious* for feedline radiation. w3rv -- Caveat Lector (Reader Beware) Help The New Hams Someone Helped You Or did You Forget That ? wrote in message oups.com... Hi Group, I have a older 5/8 wave 6m vertical base antenna. It has a tuning ring down at the bottom for SWR adjustment and it does not have any radials. Anyone know who the manufacturer and model number? Also, the fact that it does not have radials an issue? Should I add them? The SWR is pretty good. de KJ4UO |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Introduction to "AM" Medium Wave DXing - by the Ontario DX Association (ODXC) | Shortwave | |||
1/4 wave vertical vs. loaded vertical | Antenna | |||
Question on antenna symantics | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |