Home |
Search |
Today's Posts |
#25
![]() |
|||
|
|||
![]()
Richard Harrison wrote:
Richard Fry wrote: "Not so. You confuse receivers and transmitters." FM transmitters often use Class C amplifiers and frequency multipliers on the modulated signal. An AM signal can not be amplified by a Class C amplifier because of severe distortion of the modulated signal. In FM, amplitude distortion is irrelevant no matter where it occurs, receiver or transmitter. The recovered audio will sound just fine. It`s one of the many advantages of FM. The question seems to be: If an FM transmitter's output signal is not a reasonably pure sine wave, is a low-pass filter used between the transmitter and antenna to reduce the harmonics? -- 73, Cecil http://www.qsl.net/w5dxp ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Discone antenna plans | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
X-terminator antenna | CB | |||
Outdoor Antenna and lack of intermod | Scanner |