Home |
Search |
Today's Posts |
#1
|
|||
|
|||
AM Radio reception
This may not be the best pace to post this, but I figured it would be a good
place to start. I live in Maine and am trying to get a Massachusetts AM station can anyone recommend a good AM radio or better alternatives to the regular AM antenna that comes with my AM radio from Radioshack? If there are other newsgroups to check please let me know. |
#2
|
|||
|
|||
GE Super Radio is a good one
And this works well for an indoor antenna Select-A-Tenna AM Antenna http://www.ccrane.com/select-am-antenna.aspx -- Lamont Cranston "Joe McSweeney" wrote in message ... This may not be the best pace to post this, but I figured it would be a good place to start. I live in Maine and am trying to get a Massachusetts AM station can anyone recommend a good AM radio or better alternatives to the regular AM antenna that comes with my AM radio from Radioshack? If there are other newsgroups to check please let me know. |
#3
|
|||
|
|||
Joe McSweeney wrote: This may not be the best pace to post this, but I figured it would be a good place to start. I live in Maine and am trying to get a Massachusetts AM station can anyone recommend a good AM radio or better alternatives to the regular AM antenna that comes with my AM radio from Radioshack? If there are other newsgroups to check please let me know. As far as the antenna, I'd build a small loop. Small, meaning less than a full wave, which would be huge for MW... The good part, is you don't even need a direct connection to the radio to use them, although you can if you want, usually using a 2nd coupling loop. So it can be used with *any* radio. Most smaller radios, it will be like adding a dose of steroids.. And the nulls are very sharp, so you can null out noise, or other stations. You can build one cheap. The variable cap will cost the most if you buy it, and you can find them in many old junk radios, and also old stereo receivers. The ones in receivers are usually pretty good, cuz they have multi gangs, and if you tie them all together, you can get a pretty large value. You can also use switches. If you wanted to tune a freq on the upper range of the loops design, it's handy to be able to use just a single small gang, and have a low value... There are a gazillion designs on the web. I have one at http://web.wt.net/~nm5k/loop5.jpg using PVC parts you can get at any hardware, or home depot, etc.. BTW, the loops work pretty well any time of day, but where they really shine is in the daytime, and you are receiving ground wave signals. I can listen all over the state, and it's almost like being local..My main loop is a diamond, 44 inches per side, using 5 turns of wire. I have it on a floor stand, and it rotates. I just lean over and grab it , if I want to change direction. MK |
#4
|
|||
|
|||
Hummm..Actually just thinking about it, I think they
usually classify a "small loop" as 1/10 wave or less... But I'd have to refresh myself...MK |
#5
|
|||
|
|||
In article tspUd.43136$xt.30982@fed1read07, "sombra" wrote: GE Super Radio is a good one And this works well for an indoor antenna Select-A-Tenna AM Antenna http://www.ccrane.com/select-am-antenna.aspx I'll second the GE Super or the Sangean CCRadio. I also have a Select-A-Tenna which I use with the portables and a hardwired TERK version which I use with a Denon TU-800. Both work very well, but you may need to buy a Lazy-Susan to get the best use of the portable radio with the external loops mentioned. CCrane is a great place to start looking. SR1 |
#6
|
|||
|
|||
Joe McSweeney wrote:
This may not be the best pace to post this, but I figured it would be a good place to start. I live in Maine and am trying to get a Massachusetts AM station can anyone recommend a good AM radio or better alternatives to the regular AM antenna that comes with my AM radio from Radioshack? If there are other newsgroups to check please let me know. Jon, your antenna and radio might not be the problem. Depending upon where you are in ME and where the transmitter may be in MA the problem might simply be propagation. Signals in the AM broadcast band, especially those from relatively low powered stations simply don't travel as far as the signals in the shortwave bands. Duriing daytime hours most of the signal is dissipated in the ionosphere. At night as the ionization fades the signals can potentially skip and travel farther so your best chances are at night. However, some AM stations reduce there power, go off the air or change their radiation pattern at dusk to avoid putting too strong a signal into the area of other stations operating on the same frequency. Jim, WD9FRF |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Amateur Radio Newslineâ„¢ Report 1415 Â September 24, 2004 | Shortwave | |||
Amateur Radio Newslineâ„¢ Report 1415 Â September 24, 2004 | CB | |||
Amateur Radio Newslineâ„¢ Report 1402 Â June 25, 2004 | Shortwave | |||
Amateur Radio Newsline™ Report 1379 – January 16, 2004 | Broadcasting | |||
Amateur Radio Newsline™ Report 1379 – January 16, 2004 | General |