MATCHING A VERTICLE?
 

Has any one any knowledge about using "T" or Gamma matches to a vert?
For impedance matching;Hair pin matches etc. because,next question;
Has any one any knowledge of using a director or reflector with a 20 M
monoband (hb) vert? Any help appreciated.
tnx es 73's Bob wa2eaw/4

bob wrote:
Has any one any knowledge of using a director or reflector with a 20 M
monoband (hb) vert? Any help appreciated.

Look in the ARRL Antenna Book under phased vertical arrays.
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---

See Antenna books for matching and phased verticals (not verticle -- hi hi)
ARRL pubs has several.
http://www.arrl.org/catalog/

--
Lamont Cranston



"bob" wrote in message
ups.com...
Has any one any knowledge about using "T" or Gamma matches to a vert?
For impedance matching;Hair pin matches etc. because,next question;
Has any one any knowledge of using a director or reflector with a 20 M
monoband (hb) vert? Any help appreciated.
tnx es 73's Bob wa2eaw/4

Look in the ARRL antenna handbook for "shunt feeding".
That is appx the same as a gamma match, etc.. Many
feed towers this way. IE: you drop a parallel wire down
from a certain point on the tower or mast, and usually is
combined with a capacitor. Directive elements don't
work too well with verticals. Better to feed as phased
arrays. MK

I said directive elements don't work too well with
verticals...Maybe I should have said parasitic
elements...MK