Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old March 16th 05, 04:41 PM
Ken
 
Posts: n/a
Default

On 13 Mar 2005 04:48:43 -0800, "Jim Miller" wrote:
If I'm
not able to get the tuner to match this setup I'll try the 450 ladder
and and 18awg and risk the visibility.


I have an 88 ft doublet of 26 ga. wire and 300 ohm twinlead approx 25
ft up. My MFJ-971 tuner lets me tune to SWR=1.0 at every ham
frequency from 80M to 10M. 160M not so good.

Some of the minima are very sharp and easily missed, especially on
60M. I know it is working because I am copied 60M NVIS phone 300
miles away using my 5-watt FT-817 with DYC-817 compressor.

Ken KC2JDY


Ken
(to reply via email
remove "zz" from address)
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone have an EZNEC Windom Model Larry Antenna 3 June 30th 06 04:15 PM
EZNEC Model of a Terminated Vee-Beam William M. Bickley Antenna 1 February 26th 05 12:15 AM
G5RV or 135 foot doublet or Carolina Windom? Jim Leder Antenna 3 May 22nd 04 03:43 PM
EZNEC v. 4.0 at Dayton Roy Lewallen Antenna 0 May 7th 04 06:10 PM
Eznec modeling loading coils? Roy Lewallen Antenna 11 August 18th 03 02:40 AM


All times are GMT +1. The time now is 10:13 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017