Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
NM5K snip, snip and...
Besides, I've never really worried about it much. I don't think it would have any effect on how I build my short verticals. Good for you :-) Granted, we are close to optimum with mobile verticals. If I understand how and why things work, I can do better job on optimizing and maximizing the performance of the antennas, especially when it comes to more element loaded arrays. You would see significant difference in designing/optimizing say 3 element loaded beam. Modeling software uses currents in elements and calculates mutual interaction between the elements. If the current distribution and magnitude are off by 50% then we have major problem. Yuri |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
Smith Chart Quiz | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Eznec modeling loading coils? | Antenna |