LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old November 10th 03, 08:16 PM
Roy Lewallen
 
Posts: n/a
Default

Yes, I did measure it. But how much difference in your prediction would,
say, +/- 10 ohms of reactance make -- I can't guarantee my measurements
any closer than that in any case. So why not make your predictions for
35 - j2 and 35 + j18, and let's see just how much difference it makes.

Roy Lewallen, W7EL

Cecil Moore wrote:
Roy Lewallen wrote:

So, you've retracted your prediction. What's your new one, then?



No, you misunderstood my prediction. I cannot make an accurate
prediction until you tell us the feedpoint impedance of the
antenna including the coil. Is it 34.6+j8 or what? You have
told us the feedpoint impedance of the antenna without the
coil and the impedance of the coil but we still don't have
an accurate measurement for the feedpoint impedance of the
antenna including the coil. Did you measure it? If not, any
estimate is not going to be very accurate.
--
73, Cecil, W5DXP


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
Smith Chart Quiz Radio913 Antenna 315 October 21st 03 05:31 AM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM
Eznec modeling loading coils? Roy Lewallen Antenna 11 August 18th 03 02:40 AM


All times are GMT +1. The time now is 10:25 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017